Ultimaker - In the media

10 reasons to use Ultimaker Cura

While slicing and printing can be pretty demanding, Ultimaker Cura can make things easier. Whether you’re a beginner just learning the ropes or a veteran trying to streamline your printing farm, Cura can help you out. All3DP wrote an article on 10 reasons to use Ultimaker Cura.

18

Jul

2022

all3dp.com

Ultimaker behaalt ISO / IEC 27001 security certificaat

Ultimaker heeft met succes de audit voor het ISO/IEC 27001 certificaat doorlopen. Het Ultimaker-platform is een van de eerste 3D printplatformen dat door een onafhankelijke organisatie is gecertificeerd voor IT beveiliging.

08

Jul

2022

3dprintmagazine.eu

Ultimaker launch Metal Expansion kit for S5 3D Printer

Ultimaker is now offering a dedicated solution for 3D printing metal parts on the desktop using its S5 3D printer, new Cura 5.0 software, BASF Forward AM Ultrafuse 17-4PH material and the ceramic Ultrafuse Support Layer. The Ultimaker Metal Expansion Kit will include all required items for metal parts preparation from printing to accessing post-processing services, including materials and a set of dedicated print cores to support both the metal filament and its support layer, allowing full design freedom. A new Print Core DD 0.4, a highly wear-resistant core able to print the abrasive support material has been developed, but no permanent hardware modifications are needed as print cores and materials can be tapped out like any other print core or filament. The kit includes access to exclusive Ultimaker 3D Printing Academy content that has been developed with the team from BASF Forward AM to teach the full workflow with all kinds of tips and tricks to apply Metal FDM 3D printing on the Ultimaker platform.

27

Jun

2022

develop3d.com

New 3D printing tools for production line agility at L'Oreal

The 2021 Solvay AM Cup presented entries with a real-world manufacturing challenge to solve for the L'Oréal factory using 3D printing on an Ultimaker printer and Solvay filament. The winning puck design is 3D printed as one piece. In fact, the sturdy base with intricate retractable blades is only manufacturable with 3Dprinting. The AM Cup winning design has the potential to eliminate puck changes at L’Oréal’s factories greatly reducing time, labor, and increasing efficiency. Read the entire article here:

21

Feb

2022

all3dp.com

For Polymer 3D Printers, Metal Parts Are Now Within Reach

New metal composite filament from BASF Forward AM has made it easy for Austrian company SPAROX 3D to pivot its existing Ultimaker FFF capacity into metals, without major additional investments in skills or equipment. How affordable polymer 3D printers are bringing end-use metal parts within reach!

14

Feb

2022

www.additivemanufacturing.media

CASTOR integrates with Ultimaker's Digital Factory platform

CASTOR and Ultimaker have announced the integration of the former’s part screening software with the latter’s Digital Factory platform. Ultimaker’s cloud-based Digital Factory solution has been designed to give users remote management of their 3D printing systems, while CASTOR’s offering helps users to identify suitable applications of their additive manufacturing machines.

10

Feb

2022

www.tctmagazine.com

New Cura Enables Much Faster 3D Printing

Ultimaker announced a new version of Ultimaker Cura, which seems to offer much more rapid 3D printing. Ultimaker Cura is one of the most well-known 3D print preparation software tools, as many companies beyond Ultimaker have leveraged the software’s open source availability to be used for their own equipment. In addition, Ultimaker supports this activity by adding in profiles for countless devices directly into the software.

02

Feb

2022

www.fabbaloo.com

Solvay, L’Oréal, and Ultimaker organize third edition of the AM Cup

Solvay is partnering with L’Oréal, the world’s beauty specialist, and Ultimaker, an expert in professional 3D printing, to launch the third edition of its international AM Cup competition. The contest gives students, engineers, and manufacturers from around the world the chance to demonstrate their aptitude for 3D printing and create an innovative design for a 3D-printed real application.

24

Jun

2021

www.3dprintingmedia.network

Ultimaker Cura 4.9 Focuses on Digital Library Feature

The company produces new versions of the software on a regular basis for many years, and the most recent release is version 4.9. This release is largely focused around Ultimaker’s cloud ecosystem, the Digital Factory.

17

May

2021

www.fabbaloo.com

Ultimaker Cura 4.9: What’s New

According to Ultimaker, the choicest new feature of the 4.9 update is the integration of the Digital Factory’s library. If you use an Ultimaker 3D printer and have access to an Ultimaker Essentials, Professional, or Excellence subscription, you can now access any print file from the account’s Digital Library.

04

May

2021

all3dp.com

Forget digging for fossils. This museum 3D printed a full T-Rex skeleton instead

“Printing an entire T. rex is a monster job,” Jacobs said — pun possibly intended. “It took almost a year on two giant Builder Extreme 3D printers and eight Ultimaker 2+ printers to print all the 320-plus bones. Some of the bones were still too large to fit into the printer in its entirety, so those had to be digitally cut to fit.”

30

Apr

2021

www.digitaltrends.com

Ultimaker Paves the Way for the Collaborative Future of 3D Printing

As Von Hollen observed, flexibility and sustainability are the two most pivotal “ingredients” for surviving in today’s volatile post-2020 business world.

23

Apr

2021

www.engineering.com

Ultimaker Unveils its New Software Strategy

FDM 3D printing specialist Ultimaker has announced that its Ultimaker Essentials platform will now be integrated into all of its 3D printers, allowing all customers to take full advantage of its benefits.

22

Apr

2021

www.3dnatives.com

What Ultimaker’s New Platform Means for You

“Our plan is to accelerate the concept of providing companies with a solution, not just a printer,” Ultimaker CEO Jürgen von Hollen, told All3DP.

22

Apr

2021

all3dp.com

Ultimaker builds out software strategy, launches two SaaS offerings

3D printing company Ultimaker said that it is stepping up its software by bundling its printers with Ultimaker Essentials and launching two subscription services. The move highlights how 3D printing is becoming more about software platforms as additive manufacturing and the on-demand supply chain develops.

20

Apr

2021

www.zdnet.com

Ultimaker CEO Shares A Look At Strategy

I spoke with CEO Jürgen von Hollen, who stepped into the role at the start of this year and is now ready to implement the next stages of growth for the forward-thinking company.

20

Apr

2021

www.fabbaloo.com

Ecosystem Thinking At Ultimaker

As with any business operating today, Ultimaker has been well aware of the changing needs of a dynamic marketplace — and a pandemic-stricken world. Flexibility, customization, and specific, scalable solutions are keys to maintaining a strong foothold. These are all also areas where additive manufacturing has had a notable advantage.

20

Apr

2021

www.fabbaloo.com

‘Een klant wil geen 3D-printer, hij wil een oplossing’

‘Het is een interessante ervaring om in deze tijd bij een nieuw bedrijf te beginnen’, begint Jürgen von Hollen, de kersverse topman van 3D-specialist Ultimaker.

19

Apr

2021

mechatronicamachinebouw.nl

Practical 3D printing: The importance of filament runout sensors

The feature we're going to talk about is the filament runout sensor. As you might imagine, this sensor tells the printer when it runs out of filament.

16

Apr

2021

www.zdnet.com

Ultimaker Study Suggests COVID-19 Increased Worldwide 3D Printing Adoption

Ultimaker has released its 2021 3D Printing Sentiment Index (3DPSI), showing that awareness and adoption of 3D printing went up during 2020, and that companies used it in a more integrated way. While the study doesn’t delve into the reasons behind these developments, Ultimaker anecdotally linked them to the challenges posed by COVID-19 and a disrupted global supply chain.

05

Apr

2021

3dprint.com

Results From 3D Printing Sentiment Index Show Global Growth Despite Pandemic

Every year, Ultimaker conducts a global study analyzing the use of additive manufacturing and its adoption, as well as awareness and understanding of the industry and the challenges faced by users of the company’s 3D printers. The 3D Printing Sentiment Index gives a score to each participating country according to its degree of maturity in the realm of additive manufacturing.

01

Apr

2021

www.3dnatives.com

Pandemic Inspires Businesses To Create Alternative Solutions With 3D Printing According to Ultimaker's 3DPSI Research

The latest research from a global study shows the implementation of 3D printing and sophistication of its use cases increased during 2020. The pandemic inspired innovative engineers around the globe to apply game-changing, unexpected, and inspirational uses for 3D printing to ensure business continuity.

01

Apr

2021

www.koreaherald.com

3DPOD Episode 54: Ultimaker’s new CEO, Jürgen von Hollen

For the past several months, Jürgen von Hollen has been the CEO of Ultimaker. What is his vision on segmenting, approaching, and selling into this market? What does he hope to achieve in the coming years? Learn the answers to all of these questions and get a feel for Ultimaker’s new chief on the 3DPOD.

23

Mar

2021

3dprint.com

KLM innovates itself out of the COVID Crisis with smart solutions

"We want to be the most efficient airline company and 3D printed tools help us with that."

19

Mar

2021

www.parool.nl

Ultimaker supplies 3D printers to high schools in bid to raise entrepreneurship opportunities for young women

Ultimaker has donated more than 20 3D printers to American high schools in a bid to raise awareness and grow entrepreneurship opportunities for young women in 3D printing technology. The company has made the donation through the Additive Edge national outreach programme in partnership with America Makes.

11

Mar

2021

www.tctmagazine.com

Ultimaker Donating 3D Printers to Make STEM Resources Available to Women

Professional 3D printing company Ultimaker, which recently welcomed a new CEO and Chief Technology Officer, announced that, over the next year, it will be donating more than twenty of its 3D printers to high schools across the country that actively recruit female students into 3D printing courses.

11

Mar

2021

3dprint.com

Reading Between The Lines At Ultimaker

An interview with Ultimaker’s new CEO reveals some of their future directions.

10

Mar

2021

www.fabbaloo.com

Q&A: Ultimaker CEO Jürgen von Hollen on building an ecosystem, a culture & taking the company to the next level

Despite the challenges of starting a new role in lockdown a three-hour drive away from the company’s headquarters, von Hollen is working to pick up where departing CEO Jos Burger left off. He wants to further develop the company’s ecosystem, establish the right culture and, ultimately, take Ultimaker to the new heights. Here, he tells us how he intends to do all of that and more.

23

Feb

2021

www.tctmagazine.com

Ultimaker Appoints Miguel Calvo as CTO

The move comes as 3D printers are becoming increasingly important during the pandemic.

23

Feb

2021

www.engineering.com

Manufacturers Achieve Intricate Custom Rubber Parts with Structur3d and Ultimaker’s Water-Soluble Molds + Advanced Injection Molding

Structur3d’s rubber injection molding innovation in collaboration with Ultimaker’s 3D printing platform to enable 3D-printed molds that wash away earned it a place on the 2020 Ultimaker Innovators list.

17

Feb

2021

www.manufacturingtomorrow.com

Ultimaker appoints Miguel Calvo as its CTO

Ultimaker appointed Miguel Calvo as its Chief Technology Officer and Senior Vice President, Printers and Peripherals. Mr. Calvo took up his functions on February 1, 2021.

02

Feb

2021

www.3dprintingmedia.network

3Dnatives Lab: Testing the Ultimaker S5 Pro Bundle

The simplicity of installation, the communication between the devices and the advantages obtained make the Pro Bundle a truly complete pack for users who print many parts for long hours, ...

12

Jan

2021

www.3dnatives.com

Ultimaker launches new and improved Ultimaker 2+ Connect 3D printer

Ultimaker has announced the launch of an advanced version of its Ultimaker 2 desktop 3D printing platform at Formnext Connect. The Ultimaker 2+ Connect is considered to be the company’s ‘most accessible’ product ...

10

Jan

2021

www.tctmagazine.com

Best Entry-Level Business 3D Printers 2021

Ultimaker offers a comprehensive 3D printer solution, not just a machine. The company has 3D printing bundles that include the hardware, software, materials, and access to the company’s 3D Printing Academy, all at a convenient package-price.

06

Jan

2021

all3dp.com

Ultimaker Releases Its 2020 Innovators List

While 2020 turned out to be a year of disrupted supply chains and lifestyles, working from home drove unexpected digital collaboration and strengthened creativity and innovation. The 2020 Innovators List includes more than 25 visionaries using 3D printing to transform the way people work, think, and live, from the development of face masks, the production of bionic prosthetics, motorcycle parts and bespoke lingerie.

18

Dec

2020

www.3dprintingprogress.com

Ultimaker inaugurates its Innovators List to celebrate 3D printing

While 2020 turned out to be a year of disrupted supply chains and lifestyles, working from home drove unexpected digital collaboration and strengthened creativity and innovation. Ultimaker celebrated this collaboration by launching its inaugural Innovators List: a recognition of the most unexpected, game-changing and inspirational uses of 3D printing across business and education this year.

18

Dec

2020

www.3dprintingmedia.network

Ultimaker To Focus On 3D Printing Ecosystem And User Journey In 2021

I caught up with Gregory Elfering, President of Ultimaker Americas, for a discussion of Ultimaker’s 2020 reflections and 2021 trends and predictions. Elfering joined Ultimaker about two years ago,...

16

Dec

2020

www.fabbaloo.com

Best 3D printer for business and home use in 2021

My favorite aspect of the S5 is how easy it is to load filament. The filament feed system simply slots open, you feed in your filament, and close the latch. It's rock-solid reliable and virtually zero hassle.

15

Dec

2020

www.zdnet.com

Ultimaker Appoints Jürgen von Hollen as New CEO Amid Unprecedented Growth

Jürgen von Hollen, most recently the President of industrial robot developer Universal Robots, replaces Jos Burger as Chief Executive Officer (CEO) of the Dutch 3D printer manufacturer Ultimaker. Burger will be stepping down at the end of 2020 after seven years with the company, including the last five as CEO, and will join the Supervisory Board.

01

Dec

2020

3dprint.com

Software als toegevoegde waarde voor de klant

Naarmate 3D-printen een steeds nadrukkelijker plek verovert binnen industriële omgevingen, neemt de rol van software rond 3D-printen toe. Beide ontwikkelingen zijn onlosmakelijk verbonden, betoogt R&D Manager Embedded Systems John Kesseler van Ultimaker.

26

Nov

2020

www.ptindustrieelmanagement.nl

Ultimaker 2+ Connect: Specs, Price, Release & Reviews

A blast from the past at Formnext, as Ultimaker launches the Ultimaker 2+ Connect, an old printer with a few new tricks. Here's all we know...

10

Nov

2020

all3dp.com

Ultimaker and Lehvoss receive first-of-its-kind TÜV SÜD Certificate for build process reproducibility

The certification, voluntarily commissioned by the two partners, specifically covers the 3D printing process of LEHVOSS’ LUVOCOM 3F filaments on Ultimaker’s S5 Pro Bundle, which features the S5 FDM system.

05

Nov

2020

3dprintingindustry.com

You Can Stream 3D Parts for Packaging Machines Now

When you want to hear some music, there’s a good chance you’ve used an online streaming service such as Spotify. You just select a song and click to play. What if it were just as easy to do the same thing when you need a part to keep your packaging machine running? “What-if,” it turns out, is right now.

14

Oct

2020

www.packagingdigest.com

3D Printing for Preppers: Ultimaker on Emergency 3D Printing

While disaster has not yet befallen my humble family, there is no shortage of emergencies globally and the COVID-19 pandemic has demonstrated just how useful even desktop 3D printing can be during disaster situations.

14

Oct

2020

3dprint.com

ERIKS Scales up 3D Printing of Parts, Tools for OEMs, MROs

The type of relationship that exists between original equipment manufacturers (OEMs) and maintenance, repair and operations (MRO) suppliers can vary greatly, depending on industry. In aviation, OEMs’ growing prominence in the MRO sector has fueled increased competition between the two, resulting in many MRO providers expanding their capabilities to include those traditionally offered by OEMs.

18

Sep

2020

www.assemblymag.com

ULTIMAKER DEFIES INDUSTRY TREND TO ACHIEVE DOUBLE DIGIT REVENUE GROWTH DURING H1 2020

Netherlands based 3D printer manufacturer Ultimaker has announced double-digit revenue growth over H1 2020, despite the impact of COVID-19 on customer demand within the wider industry. Although many of the more industrial 3D printer manufacturers have suffered revenue declines during H1 2020, Ultimaker has turned pandemic-induced disruption into an opportunity.

04

Sep

2020

3dprintingindustry.com

3D Metalforge launches Singapore 3D printing facility with Ultimaker

The new space, believed to be the largest of its kind in Southeast Asia, aims to ramp up the company’s 3D printing capacity for customers in the defence, maritime, medical, and oil and gas industries using a suite of 21 Ultimaker S3 polymer extrusion desktop 3D printers.

19

Aug

2020

www.tctmagazine.com

Ultimaker Faces AM Challenges Head-On and Thrives During Trying Times

Accepting the reality that in-person trade shows and interviews are out of the question right now and into the foreseeable future, via Zoom we recently interviewed Greg Elfering, President of Ultimaker Americas. During the course of the interview, he spoke how the company is adapting to changing market conditions for 3D printing/additive manufacturing (AM) as it continues to innovate with its hardware and software products and services.

14

Aug

2020

www10.mcadcafe.com

ULTIMAKER LAUNCHES ‘ESSENTIALS’ SOFTWARE PACKAGE FOR 3D PRINTING NEWCOMERS

FDM printer manufacturer Ultimaker has launched its new software package – Ultimaker Essentials. The paid subscription service is aimed at companies looking to incorporate 3D printing into their existing workflows, promising to help in overcoming some barriers that may be in the way.

16

Jul

2020

3dprintingindustry.com

French Army Deploys Massive Military Print Farm for Spare Parts

The French Army has recently partnered with HAVA3D, a prominent distributor and integrator of additive manufacturing solutions based out of Le Mans, France, to deploy one of the largest 3D printing military farms in Europe, for the purpose of part production.

07

Jul

2020

3dprint.com

Best 3D printers of 2020: Find the right printer for your business needs - Ultimaker S5 Best large format dual-extruder professional printer

Which 3D printer is right for your business? We've evaluated the offerings of 14 leading printers, all capable of creating 3D objects, but with a wide-range of characteristics. If you're in the market for a 3D printer, you'll find one here that fits your needs.

13

Feb

2020

www.zdnet.com

Ultimaker gears up for growth with expanded leadership team - Desktop 3D printing vendor Ultimaker has expanded its leadership team in a move it says supports its global growth strategy.

Ultimaker announced the appointment of four new senior executives including Siebe Beintema as CIO who the company says will help to further define its IT strategy to support the growth and development of the IT and IT-related teams.

13

Feb

2020

www.itwire.com

Tech review: Ultimaker S3 3D printer does it on the double by printing in two materials - Behold the dual-extrusion wonder that is the S3, from Dutch manufacturer Ultimaker.

Behold the dual-extrusion wonder that is the S3, from Dutch manufacturer Ultimaker. What a single 3D printer can do, the S3, in many cases, can do double. For example, users can make objects in two colours of the same material in a single print job, or have its two spools loaded with different materials so less time is wasted unloading and reloading should a user wish to switch materials between print jobs. Users can also use two different materials in the same print job, though recommendations have to be followed if users plan to fuse two materials - some plastics cannot bond with others, is one caution.

04

Feb

2020

www.straitstimes.com

Ultimaker’s new 3D printer—and the most ‘democratized’ type of AM Greg Elfering told The Additive Report that AM is often the fastest, most accessible tool a shop can operate

Ultimaker Americas’ VP of worldwide accounts, Greg Elfering, told Additive Report Editor Don Nelson at FABTECH 2019 that a 3D printer is one of the most powerful tools in a manufacturer’s toolbox.

31

Jan

2020

www.thefabricator.com

Science of Supercross: 3D printing fitting in well On this edition of Science of Supercross, Jeremy McGrath looks at 3D printing's use within the sport and advances that could make a difference well into the future.

On this edition of Science of Supercross, Jeremy McGrath looks at 3D printing's use within the sport and advances that could make a difference well into the future.

19

Jan

2020

www.nbcsports.com

3D printing is closing the door on physical warehouses - 3D printing is set to make space-hungry centralised storage centres a thing of the past for many products, and eliminate the need for expensive distribution systems.

3D printing is set to make space-hungry centralised storage centres a thing of the past for many products, and eliminate the need for expensive distribution systems.

27

Nov

2019

eandt.theiet.org

Ultimaker S5 Pro Bundle: Review the Specs - The Ultimaker S5 Pro Bundle brings automated material handling and a safer work environment to the Ultimaker S5 3D printer. Let's review the specs.

The Ultimaker S5 Pro Bundle brings automated material handling and a safer work environment to the Ultimaker S5 3D printer. Let's review the specs.

22

Nov

2019

all3dp.com

Gerhard Schubert GmbH 3D prints end-use parts for packaging lines with Ultimaker - The benefits are reduced logistical risks, increased machine uptime and the ability to deliver parts when and where needed.

Ultimaker has revealed how Gerhard Schubert GmbH, a global market leader for top-loading packaging machines (TLM), is using its desktop 3D printing systems to print end-use parts. The company, whose flexible TLM technology is used by major brands in the foods, beverages, pharmaceuticals and technical consumer goods markets such as Ferrero, Nestlé, Unilever and Roche, has created its own digital warehouse to deliver functional parts to customers for machines used to automate the manufacturing process. The benefits are reduced logistical risks, increased machine uptime and the ability to deliver parts when and where needed.

21

Nov

2019

www.tctmagazine.com

How 3-D printing is transforming the $12 trillion manufacturing industry and fueling the 4th Industrial Revolution

3-D printing is disrupting the $12 trillion manufacturing industry worldwide, and companies such as Ford, L’Oreal, Siemens and others are training workforces to adopt skills in this technology.

09

Nov

2019

www.cnbc.com

The Financial Benefits of 3D Printing - how do you make the business case for 3D?

3D printing is no longer tomorrow’s promise; it is available for manufacture today. But with much competition in the investment sphere of technological innovations, from Artificial Intelligence to Augmented Reality, how do you make the business case for 3D?

09

Oct

2019

www.azom.com

Ultimaker rebrands and relocates headquarters to Utrecht

Dutch 3D printer manufacturer Ultimaker has announced the relocation of its Geldermalsen-based global headquarters to Utrecht, central to the Netherlands, as well as a company rebrand.

02

Jul

2019

3dprintingindustry.com

Ultimaker's new president (AMERICAS) talks about a recent Heineken case study and how additive opportunities can could bubble up throughout enterprises.

24

May

2019

www.industryweek.com

Dutch 3D printer manufacturer Ultimaker has announced that compatriot brewing company Heineken has been using its printers to produce custom tools and machine parts for its brewery in Sevilla, Spain.

21

May

2019

www.manufacturingglobal.com

In this in-depth first-look review, David Gewirtz takes a hands-on look at the flagship of the Ultimaker line, the new S5. Is it worth the $6,000 the machine costs?

In this in-depth first-look review, David Gewirtz takes a hands-on look at the flagship of the Ultimaker line, the new S5. Is it worth the $6,000 the machine costs? Read on to find out.

10

May

2019

www.zdnet.com

Ultimaker says it has now had more than 80 companies around the world develop material print profiles for its extrusion-based desktop 3D printing systems.

10

Apr

2019

www.tctmagazine.com

At Ford’s RIC – Research & Innovation Center in Aachen, Germany, the automotive leader is using intuitive software to automate the design of additive manufactured production tools.

25

Mar

2019

www.tctmagazine.com

The Ultimaker S5 is our summer 2019 pick for the "Best Dual Extruder 3D Printer". Check out our Ultimaker S5 review to find out why it is an excellent multi-material machine for small businesses.

13

Mar

2019

all3dp.com

Ultimaker Cloud forms the foundation for future value propositions provided by Ultimaker and key industry partners," said Ultimaker CEO Jos Burger. "This is a crucial next step in our journey to speed up the world's transition to local digit

Ultimaker Cloud forms the foundation for future value propositions provided by Ultimaker and key industry partners," said Ultimaker CEO Jos Burger. "This is a crucial next step in our journey to speed up the world's transition to local digital manufacturing."

21

Feb

2019

www.zdnet.com

Ultimaker has announced that it has been selected by Airbus to supply Ultimaker 3D printers, Ultimaker Cura software, and materials to use in its European facilities. Airbus will mainly use the Ultimaker portfolio for the direct, local production of tools,

Ultimaker has announced that it has been selected by Airbus to supply Ultimaker 3D printers, Ultimaker Cura software, and materials to use in its European facilities. Airbus will mainly use the Ultimaker portfolio for the direct, local production of tools, jigs, and fixtures, and printing lightweight design parts with composite materials.

14

Feb

2019

www.aero-mag.com

The Ultimaker S5 ($5,995) a professional-grade 3D printer, stands out for its combination of dual extruders (enabling you to print with two different kinds or colors of filament), a large dimensional printing area ("build volume"), easy setup and

The Ultimaker S5 ($5,995) a professional-grade 3D printer, stands out for its combination of dual extruders (enabling you to print with two different kinds or colors of filament), a large dimensional printing area ("build volume"), easy setup and use, and very good overall print quality.

25

Jan

2019

www.pcmag.com